The E3D v6 is one of the most versatile and adaptable 3D Printer hotends on the market, with the standard heater block accepting nozzles from 0.15mm all the way up to 0.8mm and the Volcano heater block accepting up to a 1.2mm nozzle. Enter the SuperVolcano - a monstrous hotend with a gigantic melt zone allowing for nozzles up to 1.4mm in extrusion diameter. Print fast, print huge. Do it all with E3D SuperVolcano!
This Eruption pack includes everything you need to convert an existing v6 or Titan Aero hotend to SuperVolcano with a variety of nozzle sizes. Replace the standard heater block with the included SuperVolcano block, 80w heater cartridge and extra long nozzle for the ultimate in fast, strong 3D printing hardware. With variable nozzle sizes available from 0.6mm all the way up to 1.4mm the SuperVolcano is applicable in a wide variety of applications where ultra wide or high speed are important factors. With the standard Plated Copper heater block, the SuperVolcano welcomes temperatures upwards of 400°C with an upgraded temperature sensor.
Assembled SuperVolcano Heater Block
Due to the current of the 12v electronics, the Mosfet board is required to run the heater cartridge at this voltage!
Everything you need to upgrade today!
Put simply, MatterHackers is the smart place to shop for all things 3D printing and digital manufacturing. The MatterHackers pros are here to partner with you through every step of your journey turning idea into reality and here are just a few of the perks you’ll receive as a customer:
Have a question about this MatterHackers E3D SuperVolcano Eruption Pack - 3.00mm (12v)? Looking for a recommendation? No problem. Feel free to contact us.