Liqcreate Liqcreate Resin for SLA & DLP 3D Printers - Dental Model Pro Gray 1kg

Liqcreate Dental Model Pro is an excellent choice for manufacturing highly accurate dental models, dies, and aligner models. In addition to being very easy to print, Dental model Pro resin features excellent properties like low shrinkage, low odor, high accuracy, and dimensional stability. This resin is designed for use on all open source SLA and DLP 3D Printers in the range of 385-420nm.

Product No. loading...


  • 385 – 405nm wavelength 3D printer compatibility
  • Matte finish
  • High Accuracy
  • Dimensional stability
  • Requires a UV post-cure
  • Low odor
  • Low shrinkage


  • Dental Models
  • Dies and aligner models
  • C&B
  • Thermoforming


  1. Shake the bottle for at least 60 seconds before use.
  2. Allow the resin to rest for 10 minutes after shaking to let air bubbles escape before pouring into resin vat.

Note: This resin can be poured back into the bottle after use, however, it is important to check for residual pieces of polymer before doing so. Always take protective measures when handling Liqcreate resins. For more details on safety please check the attached Safety Data Sheet.


  • Container: Bottle
  • Net weight: 1kg
  • Wavelength: 385- 405nm
  • Density: 1.18g/cm

TDS Dental Model Pro Gray

TDS Dental Model Pro Beige


The following compatible 3D printers and settings are available for Liqcreate resins, which are internally tested by Liqcreate and industrial partners:

  • Anycubic Photon
  • Anycubic Photon Mono
  • Anycubic Photon Mono X
  • Phrozen Sonic Mini 4K
  • Phrozen Sonic XL 4K
  • Asiga
  • Ackurretta Dentiq
  • Elegoo Mars 2
  • Elegoo Saturn
  • Creality Halot-One
  • Creality Halot Sky
  • Shining3D Accufab-L4K
  • Shining3D Accufab-L4D
Please note, all Clearance Item purchases are Final Sale and are not covered by the MatterHackers Return Policy - this excludes Refurbished 3D printers and machines, which have at least a 6-month warranty.
Back to top