Liqcreate Resin for SLA & DLP 3D Printers - Tough-X (1kg)

Liqcreate Tough-X is an opaque black engineering-grade photopolymer resin designed for use on all open source SLA and DLP 3D Printers in the range of 385-420nm. Boasting exceptional impact resistance and up to 150% elongation properties make this the ideal resin for producing industrial spare parts and functional ABS type end-products.

Tagged: and ,
Product No. loading...

MAIN FEATURES:

  • 385 - 420nm wavelength 3D printer compatibility
  • ABS-like properties
  • Exceptional impact strength
  • High elongation
  • Heavy duty
  • Requires a UV post-cure
  • Very robust and resistant
  • High performance

APPLICATIONS:

  • Industrial parts
  • Functional parts
  • ABS-like end products

HOW TO USE:

  1. Shake the bottle for at least 60 seconds before use.
  2. Allow the resin to rest for 10 minutes after shaking to let air bubbles escape before pouring into resin vat.

Note: This resin can be poured back into the bottle after use, however, it is important to check for residual pieces of polymer before doing so. Always take protective measures when handling Liqcreate resins. For more details on safety please check the attached Technical Data Sheet.

TECHNICAL SPECIFICATIONS:

  • Container: Bottle
  • Net weight: 1kg
  • Wavelength: 385- 405nm
  • Density: 1.18g/cm

TDS

SDS

COMPATIBLE WITH:

The following compatible 3D printers and settings are available for Liqcreate resins, which are internally tested by Liqcreate and industrial partners:

  • Peopoly Phenom Prime
  • Miicraft 125
  • Cubicon Lux hd
  • Anycubic Photon
  • Kudo3D Bean
  • Wanhao Duplicator 7
  • Wanhao Duplicator 8
  • Uniz Slash
  • Phrozen Shuffle
  • Phrozen XL
  • Phrozen Transform
  • Elegoo Mars
  • Beam3D Prism
Back to top
loading...