Liqcreate Liqcreate Resin for SLA / DLP / MSLA 3D Printers - Composite-X (1.5kg)

Liqcreate Composite-X is an extremely rigid, high-performance reinforced nano-composite resin designed for use on all open source SLA, DLP & MSLA 3D Printers in the range of 385-420nm. Boasting a flexural modulus of over 9000 MPa and a Flexural strength of 150-170 MPa, this material is easily one of the stiffest and strongest resins available on the market. Ideal for use in rapid tooling, wind tunnel testing, and other industrial applications this materials properties can be strengthened through UV-post curing or a thermal cure.

loading...
Product No. loading...

MAIN FEATURES:

  • 385 – 420nm wavelength 3D Printer compatibility
  • High chemical resistance
  • Low shrinkage
  • Flexural Modulus of over 9000 MPa
  • Flexural Strength of 150-170 MPa (after post-UV curing)
  • Increased tensile and compression strength (after post-UV curing)
  • Reduced water sorption (after post-UV curing)

APPLICATIONS:

  • Aerospace & other aerodynamic applications
  • Rapid tooling
  • Industrial parts
  • Functional parts

HOW TO USE:

  1. Shake the bottle for at least 60 seconds before use.
  2. Allow the resin to rest for 10 minutes after shaking to let air bubbles escape before pouring into resin vat.

Note: This resin can be poured back into the bottle after use, however, it is important to check for residual pieces of polymer before doing so. Always take protective measures when handling Liqcreate resins. For more details on safety please check the attached Technical Data Sheet.

TECHNICAL SPECIFICATIONS:

  • Container: Bottle
  • Net weight: 1.5kg
  • Wavelength: 385 - 420nm
  • Density: 1.52 g/cm3

TDS

SDS

COMPATIBLE WITH:

The following compatible 3D printers and settings are available for Liqcreate resins, which are internally tested by Liqcreate and industrial partners:

  • atum3D DLP Station 5
  • Shining3D AccuFab-L4K
  • Ackuretta Freeshape 120
  • Prusa SL1
  • 3DWare Zeta 4K
  • Anycubic Photon
  • Anycubic Photon Mono
  • Anycubic Photon Mono 4K
  • Anycubic Photon Mono SE
  • Anycubic Photon Mono X
  • Anycubic Photon M3
  • Anycubic Photon M3 Plus
  • Anycubic Photon D2
  • Elegoo Mars
  • Elegoo Mars 2
  • Elegoo Mars 3
  • Elegoo Saturn
  • Elegoo Saturn 2
  • Elegoo Saturn 3
  • Phrozen Sonic Mini 4K
  • Phrozen Sonic Mighty 4K
  • Phrozen Sonic Mini 8K
  • Peopoly Phenom L
  • Zortrax Inkspire
  • Zortrax Inkspire 2
  • Peopoly Phenom Prime
  • Creality Halot-Sky
  • Creality LD-002H
  • Nexa3D XiP
  • Asiga Freeform PICO
  • Asiga Max UV & Pro 4K
  • 385 – 420nm MSLA, SLA & DLP printer
Back to top