The Choice is Yours!
This print bed features two components. Of those two components, you can choose which surface works best with the material at hand instead of having to pick and choose only between the filaments that work with the one type of surface you have. If you want more surface options beyond glass and PEI, having an additional Glass/PEI Surface with BuildTak installed will maximize your printers uptime and filament compatibility.
Two In One
Just like the BuildTak FlexPlate, this plate allows for double functionality as there is a separate surface material on the other side to allow printing easily with different materials. This also means easy removal for maintenance if the print bed should ever break or need replacement.
The More the Merrier
So you’ve finished your print using the LulzBot TAZ Glass/PEI Print Bed and you need to immediately start a new print. That’s easy! Since the Print Bed is modular, you can swap in a second, clean piece and start your next print right away. The print bed can be easily removed, cleaned, and reused. You can further decrease downtime in maintenance by keeping an extra LulzBot TAZ Glass/PEI Print Bed on hand. All this without having to disconnect any wires!
LulzBot TAZ Glass/PEI Print Bed Specs
Borosilicate Glass/PEI Dimensions: 300mm x 300mm x +/- 3.75 mm (11.81 in x 11.81 in x +/- 0.125 in)
PEI Surface recommended for
Glass Surface recommended for
Why Buy From MatterHackers?
At MatterHackers we pride ourselves on offering friendly service, advice and support. Our prices are always the lowest in the industry when you factor in our free shipping for every item on the MatterHackers site (including 3D printers). Most of all, our staff is friendly and knowledgeable. They have been 3D printing for several years now and are happy to answer your 3D printing questions. Have a question about the amazing capabilities of your new LulzBot TAZ Glass/PEI Print Bed? No problem. Feel free to give us a call.
