MakerGear MakerGear V4 Nozzle - Brass - 0.50mm
The MakerGear M3 family of 3D printers are massively reliable machines that hold calibration and enable dependable, repeatable results. The stock machines comes assembled with 0.35 brass nozzles, perfect for PLA, ABS, PETG, and many more 3D printer filaments. This 0.50mm brass nozzle is excellent for printing large parts that need strong inter-layer adhesion.
| List Price: | $20.00 |
|---|---|
| Price: | $20.00 |
| Price: | $... |
| Order Now: | Ships calculating... |
Upgrade your M2, M3, or M3 ID for abrasive filament today
The MakerGear M2, M3, or M3 Independent Dual Extruder 3D printer is built to take on the toughest job's you could throw at it. Capable of creating strong and beautiful parts, the stock machine leaves only one thing to be desired - printing with abrasive filament. Enter the stainless steel nozzle upgrade, a direct replacement for the standard brass nozzle that allows the user to create parts using abrasive filaments like NylonX, Glow in the Dark, or Carbon Fiber PLA. This package is a pre-assembled hotend, which can easily be swapped out to replace the stock unit.
The 0.50mm brass nozzle
Easy to install for a quick upgrade
The nozzle on the MakerGear M2, M3 or M3 ID is incredibly easy to replace. They are constructed with female threads on the nozzle and male threads on the heater block, opposite from many other nozzle manufacturers. The process to replace the nozzle is detailed here:
- Unload any filament from the printer.
- Grip the hotend with an adjustable wrench.
- Use an 11mm wrench to gently unscrew the nozzle.
- Use the same 11mm wrench to screw the new nozzle on.
This process can be completed with the hotend installed on the machine, or you can remove the entire assembly and swap out the nozzle away from the printer itself.
A view of the hotend with the brass nozzle installed.
Note: This product listing is for a standalone nozzle only!