Monoprice Monoprice MP10 Mini 3D Printer
The MP10 Mini 3D Printer by Monoprice is the smaller form factor model of the Monoprice MP10 3D Printer. With its 200mm x 200mm heated print bed, the MP10 Mini 3D Printer is similarly feature-rich like it’s big brother. It flaunts assisted bed level sensors to ensure a great first layer every time; a heated, magnetic spring-steel print bed so you can print with your favorite materials and remove finished 3D prints with ease; a resume print function to safeguard long 3D print jobs from unexpected interruptions; a magnetically removable printhead for easy maintenance and upgradability; and many more features that make this 3D printer a great, affordable choice for beginners and power users alike.
THE MP10 MINI HAS MINIMAL SETUP AND IS EASY TO OPERATE
The Monoprice MP10 Mini was designed to be simple to set up and operate. This 3D printer does not come as a kit; it comes almost fully assembled with clear and detailed instructions to guide you through a couple of installation steps needed before printing. After that, you will want to level the print bed to ensure your first layers adhere to the bed properly. Luckily, the assisted bed level sensor on the MP10 Mini 3D Printer makes this process a walk in the park. You can initiate automatic bed leveling and other calibration wizards from the easily-navigable and responsive touch screen interface on the front of the printer.
HIGHLY FEATURED COMPONENTS ENHANCE THE PRINTING EXPERIENCE WITH THE MP 10 MINI
Some of the best features of the MP 10 Mini 3D Printer are found in the device’s components. The removable, flexible spring steel print bed is also heated; along with the all-metal, magnetically removable printhead, the MP 10 Mini 3D Printer can handle all your favorite materials. The magnetically removable printhead and excellent cable management make servicing your MP 10 Mini 3D Printer a simple task, while also allowing future upgrades to be done easily. The dual rail gantry on the Y-axis helps provide stability to the print bed, reducing wobble and artifacts in finished 3D prints. For peace-of-mind, the MP 10 Mini features a “resume print function” that allows a 3D print job to be resumed exactly where it left off in the event of a power outage or power failure. The built-in filament flow sensor works in tandem with this feature to pause the 3D print job if filament runs out.
WHAT’S IN THE BOX?
- MP10 Mini 3D Printer
- Filament rack
- Plastic scraper
- USB Cable
- Memory card
- 4 x hex wrenches (2mm, 2.5mm, 3mm, 4mm)
- M5x20 screw
- M4x6 screw
- Open-end wrench (8mm)
- AC power cord
- User’s manual
- Maximum print area: 200 x 200 x 180mm
- Software: Cura, KISSlicer, Simplify 3D, MatterControl, or any g-code software
- Connectivity: WI-Fi, Micro USB, microSD
- Filament diameter: 1.75mm
- Print speed: up to 100 mm/s
- Layer thickness: 50-300 microns
- Max nozzle temperature: Up to 280°C
- Max print bed temperature: Up to 110°C
- Build platform: heated, removable, flexible spring steel
- Assisted bed leveling
- Input power: 110~220 VAC, 50/60 Hz
- Dimensions: 15.7” x 21.0” x 15.7” (400 x 533 x 400mm)
- Weight: 20.9 lbs (9.5 kg)