Nexa3D Nexa3D XiP UV Resin Wash+Cure Station
The Nexa3D XiP UV Resin Wash+Cure Station is your solution for post-processing, after you've removed the gorgeous, completed resin prints from your XiP SLA 3D printer. All-in-one, and automated, this is an effective and tidy post-processing system.
Top Features of the Nexa3D XiP UV Resin Wash+Cure Station:
• Wash & Cure SLA Resin Prints
• Magnetic Stirring System Cleans Consistently without Damaging Part
• Capacity of 5.5 Liters
• Designed to Fit Entire XiP Build Plate
• Validated curing performance from material partners
|Processed Immediately Free U.S. Shipping
The Nexa3D XiP UV Resin Wash+Cure Station
All-in-one, Automated Post-Processing for Resin 3D Prints
The Nexa3D XiP UV Resin Wash+Cure Station is an effective and easy-to-use machine that's great for professionals, educators, and any industrial or manufacturing applications. Equipped with all modern quality-of-life features that make print-washing and post-curing easy, yet compact enough for any work space.
Here are the key features of the Nexa3D XiP UV Resin Wash+Cure Station:
- Wash SLA Prints to Remove Excess Resin
- Post-Cure to Ensure a Solid Part
- Magnetic Stirring System Cleans Consistently without Damaging Part
- Capacity of 5.5 Liters
- Designed to Fit Entire XiP Build Plate
Easily Clean Off Excess Resin
The Nexa3D XiP Wash+Cure makes cleaning resin 3D printed parts easy in 3 quick steps:
- Place parts in the bucket filled with xClean
- Prints can remain attached to XiP build plate
- Activate Wash for about 4 mintues
- Remove freshly cleaned resin prints from bucket
Quickly Solidfy Resin Prints
Cure solid resin parts in minutes instead of hours with the XiP Wash+Cure.
- No need to rely on the sun to cure
- Complete the process in minutes instead of hours
- Skip DIY-ing a makeshift cure station
- Evenly project the correct UV wavelength with built-in LED lights and turn table
Built for Efficient Post-Processing
Nexa3D XiP's Wash+Cure optimizes resin post-process experience using the following included features:
- Magnetic Stirring System for consistent washing
- Wash bucket holds up to 5.5L & is compatible with the XiP build plate
- Built-In powerful 405nm LED Tower
- Internal reflectors in hood for additional curing power
- Rotating base for even surface curing
What is Included with the Nexa3D XiP Wash+Cure?
- Wash+Cure Machine
- Wash Bucket
- Box of Wash+Cure Accessories
NOTE: The bucket included in the Toolkit is the same as the Wash+Cure bucket. When purchasing the Wash+Cure, you'll then have two buckets to enable two-stage washing.
What are the Technical Specifications of the Nexa3D XiP Wash+Cure?
|Resin Wash & Cure
|Additional Curing Enhancements
|Internal reflectors on hood
|Max Wash Bucket Capacity
|Nexa3D xCLEAN or Isopropanol