xTool xTool Selected Air Compressor & Air Dryer
The xTool Selected Air Compressor & Air Dryer provides an efficient gas solution for metal cutting applications. This professional system delivers burr-free cuts on stainless steel, aluminum, and brass while eliminating the need for expensive nitrogen or argon gas tanks, saving thousands in operating costs annually.
- Cuts 4mm stainless steel, 4mm aluminum, and 3mm brass with burr-free results
- Operates at 87 PSI for consistent cutting performance
- Eliminates need for expensive nitrogen or argon gas tanks
- Professional-grade air compressor and dryer combination
To learn about available discounts, training, and maintenance options, please use the form below and a MatterHackers Expert will contact you within one business day. Alternatively, you can always feel free to give us a call at +1 (800) 613-4290 or email sales@matterhackers.com.
To get an instant quote, add everything you need to your cart, and click "Download as quote".
xTool Selected Air Compressor & Air Dryer
Consistent Clean Cuts
xTool Air Compressor & Dryer delivers burr-free metal cuts on 4mm stainless steel, aluminum, and 3mm brass at 87 PSI.
Key Features of the xTool Selected Air Compressor & Air Dryer:
- Compact space-saving design to fit your studio space.
- Easily cut through 4mm metal.
- HyperPure Filtration System applies a triple-stage industrial-grade filter that removes 99% of moisture, impurities, and oil.
- Deliver stable, continuous air pressure powered by a 2,200W motor and a 20L gas tank.
- Able to reliably operate for extended durations in environments ranging from -10°C to 40°C
Cost-Effective Metal Cutting
Replace expensive nitrogen and argon gas tanks with this efficient air compressor system. The combination of compressor, dryer, and SaveGas nozzle technology delivers professional metal-cutting results using free compressed air instead of costly specialty gases.
- Save annually on gas expenses.
- No more gas tank refills or delivery costs.
- Immediate ROI through reduced operating expenses.
Professional Cutting Performance
Achieve burr-free cuts on various metals with consistent 87 PSI operation. The system handles demanding materials, including 4mm stainless steel and aluminum, plus 3mm brass, with precision and reliability for professional fabrication work.
- Burr-free cuts on stainless steel up to 4mm.
- Handles aluminum and brass materials effectively.
- Consistent 87 PSI pressure delivery.
Complete Air Solution
This integrated air compressor and dryer system provides clean, dry compressed air essential for quality metal cutting. The air dryer removes moisture that can affect cut quality, ensuring consistent results in any working environment.
- Integrated compressor and dryer design.
- Moisture removal for clean cutting gas.
- Reliable operation in various environments.
What's In the Box
 |
Air Compressor |  |
Filters for the silencer |
 |
Tube |  |
Quick Start Guide |
 |
Safety Instructions | ||
 |
Air Dryer |  |
Filter 1 |
 |
Filter 2 |  |
Wrench |
 |
Screwdriver |  |
Tube (3m) |
 |
Quick Start Guide |  |
Safety Instructions |
Technical Specifications
xTool Selected Air Compressor
| Max. Air Pressure | 145 PSI (1.0 MPa) |
| Working Air Pressure | 87 PSI to 114 PSI (0.6 MPa ~ 0.79 MPa) |
| Max. Air Flow | 12.4 SCFM (350 L/min) |
| Tank Capacity | 5.3 Gallon (20L) |
| Rated Power | 3.0 HP (2200 W) |
| Recovery Time | 45s from 0 to 145 PSI (0~1.0 MPa) |
| Product Dimensions | 18.11'' × 20.87'' × 10.63'' (460 mm × 530 mm × 270 mm) |
| Product Weight | 35.27 lbs (16 kg) |
| Operating Voltage | 220 V |
| Pipe Diameter | 0.39'' (10 mm) |
| Working Temperature | 14 °F to 104 °F (-10 ℃ ~ 40 ℃) |
xTool Selected Air Dryer
| Filtration Efficiency | 99% moisture drying, 99.999% oil/rust removal |
| Max. Allowable Airflow | 14.1 CFM (400L/min) |
| Max. Allowable Air Pressure | 181 PSI (1.25 MPa) |
| Dew Point | 36 ℉~50 ℉ (2 ℃~10 ℃) |
| Air Inlet Temperature | ≤113 ℉ (45 ℃) |
| Rated Power | 0.51 HP (380 W) |
| Product Dimensions | 15.83'' × 13.98'' × 8.94'' (402 mm × 355 mm × 227 mm) |
| Product Weight | 23.81 lbs (10.8 kg) |
| Operating Voltage / Current |
|
| Pipe Diameter | 0.39'' (10 mm) |
| Working Temperature | 14 °F to 104 °F (-10 ℃ ~ 40 ℃) |
FAQ
Can I use the air compressor separately?
No, the air compressor and air dryer must be used together. Otherwise, compressed air containing moisture, oil, and dust will enter the welding gun and air lines, which will not only degrade cutting performance but also damage the equipment.
Can I use the xTool air dryer with my own air compressor?
Yes, but the air compressor should meet strict requirements:
- For the best cutting results, the xTool air dryer should be used with an air compressor rated at over 145 PSI (1.0 MPa) and an airflow of over 7 CFM @ 87 PSI (200 L/min @ 0.6 MPa) when using the xTool SaveGas nozzle.
- The airflow entering the air dryer should be lower than 14.1 CFM (400 L/min), the air pressure should be lower than 181 PSI (1.25 MPa), and the air temperature should be lower than 122℉ (50℃). Otherwise, it will cutting effect will not be satisfactory, and will cause damage to the air dryer.
What metals can be cut using the xTool's air compressor and refrigerated dryer?
The maximum air pressure output of the xTool air compressor is 1.0MPa, stably providing over 0.6MPa during cutting.
- When paired with the xTool SaveGas Nozzle, it can cut up to 4mm stainless steel, 4mm aluminum, 3mm brass, 1mm carbon steel (ordinary nozzle), and 1mm galvanized steel (ordinary nozzle) with no burrs.
- For thicker stainless steel, it is recommended to use nitrogen, argon, or an air compressor with a pressure above 1.2MPa.
- For thicker carbon steel, oxygen cutting is advised.
How do the xTool air compressor and air dryer differ from other brands?
- The xTool air compressor is both compact and powerful, featuring a 5.2 HP motor that delivers up to 1.0 MPa of pressure and 14.1 CFM of airflow, making it specifically designed for metal cutting applications.
- The xTool air dryer features a unique heat exchange module that rapidly cools compressed air, along with a three-stage precision filtration system that removes 99.999% of oil and dust.
In contrast to other dryers that only offer one or two filtration stages, xTool's advanced filtration system significantly enhances efficiency, ensuring a longer lifespan and superior cutting results.
How does an air compressor differ from nitrogen or argon gas?
- Lower Cost: Nitrogen and argon cylinders can be quite expensive. For instance, a 40L nitrogen cylinder at 1.2 MPa lasts only about 30 minutes, which means frequent replacements are necessary. In contrast, an air compressor utilizes free ambient air and only requires electricity, resulting in significant annual savings.
- Better Performance for Stainless Steel: When cutting thicker stainless steel at the same settings, compressed air produces burr-free cuts at lower pressures. However, using compressed air, which contains oxygen, can lead to oxidation, resulting in darkened cut surfaces. Nitrogen, on the other hand, ensures oxidation-free cuts with bright white finishes.
- Important Note: The xTool SaveGas Nozzle may cause surface scratches and is not suitable for cutting intricate patterns smaller than 2.5 mm. If high cutting quality and precise patterns are necessary, it is advisable to use standard nozzles and maintain a pressure above 1.2 MPa (whether using compressed air or nitrogen/argon).
