BOFA AD 350 Fume Extraction System for Laser Cutters with Hose Kit for 4" Laser Exhaust Port

THE BOFA AD 350 FUME EXTRACTION SYSTEM FOR LASER CUTTERS PROVIDES A SAFE AND FLEXIBLE WORK ENVIRONMENT FOR ALL

A fume extraction system is a strongly recommended safety addition to any enclosed workspace equipped with a CO2 laser cutter. By maintaining a dust-and-smoke free operating area, the BOFA AD 350 Fume Extraction System for laser cutters helps to protect your health, your valuable equipment, and your finished product. By reducing the number of contaminants in the air, the BOFA AD350 Fume Extraction System will assist in delivering consistently great laser cutting results. It is ideal for use in a variety of laser cutting, engraving, and marking environments like the classroom, workshop, or small business. The BOFA AD 350 Fume Extraction System can generate up to 223CFM and is compatible with laser cutters and engravers with up to a 24"x12" bed. Hose kits are available that can connect to any laser cutter or engraver exhaust port up to 4” diameter.

THE THREE-STAGE FILTRATION PROCESS OF THE BOFA AD 350 FUME EXTRACTION SYSTEM IS THE KEY TO KEEPING YOUR AIR CLEAN

The BOFA AD 350 Fume Extraction System utilizes a three-stage filtration process. First, the impressive surface area coverage of the DeepPleat pre-filter captures any large particles before the webbed mini-pleat HEPA filter grabs any small particles that may have escaped the pre-filter. Finally, the optimized advanced carbon filter absorbs and eliminates any hazardous fumes that remain before venting out nice, clean air. The reverse airflow technology feature of the BOFA AD 350 unit causes a fall in air velocity causing larger particles to fall out of the air stream and into the filter’s dropout chamber. With less particulate matter entering the filter media, the filter life is significantly increased, enhancing filter capture performance and ensuring a longer life. Regardless, BOFA has made it simple for users, and each filter stage features a condition indicator so that you know when it is time to replace the filter.

The BOFA AD 350 Fume Extraction System is compatible with a variety of 40W and 50W CO2 lasers in the MatterHackers catalog, including the Dremel DigiLab LC40 Desktop Laser Cutter.

WHAT’S IN THE BOX?

• BOFA AD 350 Fume Extraction System
• DeepPleat Pre-Filter
• Combined (HEPA/Carbon) Filter
• Power cord

TECHNICAL SPECIFICATIONS

• Dimensions (HxWxD): 23.23 x 15.94 x 18.31”
• Hose inlet size: 100mm
• Cabinet construction: Brushed stainless steel / Powder coated mild steel
• Airflow / pressure: 223cfm / 96mbar
• Electrical data: 115-230v 1ph 50/60Hz; Full load current: 12.5 amps / 1.1kw
• Noise level: < 62dBA (at typical operating speed)
• Weight: 77lbs
• Approvals/Certifications: cUL, UL, CE
• Download the Technical Data Sheet here!