The all new E3D Titan Aqua Water Cooled Hotend and Extruder - 1.75mm (24v) combines the technology of the Titan Aero with new water-cooling technology to enable printing at higher temperatures.
|Order Now:||Ships calculating... Free U.S. Shipping|
The big difference between the Titan Aero and the Titan Aqua is the cooling technology. The Aero uses a fan to air-cool the heat sink while the Aqua uses the power of water-cooled technology. The water-cooling is much quieter since the fan and radiator are larger and separate from the hotend. This is perfect for use in warm chambers where air-cooling is less effective, thus improving the thermal performance and print consistency of the Titan Aqua.
Warm coolant is passed through an external radiator for cooling
Titan Aero Upgraded
The Titan Aqua has all the same features that makes the Titan Aero an excellent tool head, including the idler mechanism, easy filament change, sharp-toothed custom-machined hobb, and precision 3:1 gearing ratio. The new water cooling technology along with other optional upgrades such as the plated copper blocks and nozzles further improve its performance. Not only is the print head less bulky, it has less vibration which ultimately increases print quality.
The assembled Titan Aqua
Complete the Titan Aqua package
This item - the Titan Aqua hotend and extruder - does not include the tubing, fan, pump, or radiator required for a complete liquid-cooled package. We have the E3D Water Cooling Kit available as an add-on to complete the setup here. Or, if you prefer to build a different system with your own components feel free - the only compatibility to keep in mind are the adapters that accept 4mm tubing on the Titan Aqua extruder.
What's In The Box?
- Main body
- Sealing plate
- Filament guide
- Hobbed shaft with Derlin gear
- Pinion gear
- V6 aluminium heater block
- V6 heatbreak
- V6 brass nozzle
- E3D 'Compact but Powerful' NEMA17 motor
- Motor cable
- Thermistor and connector cable
- 24v 30W heater cartridge
- V6 universal fixings kit
- 2 x M5 4mm Push-fit elbow fittings
- 2 x MR95ZZ bearings
- M3x3 Grub screw
- 4 x M4x15 Socket head cap screws (for mounting)
- 2 x M3xM25 Socket head cap screws
- M3x16 Socket head cap screws
- Titan idler spring
- Silicone sealing gasket
- Titan idler arm
- V6 Silicone sock
- Thermal compound paste
- 100mm PTFE tubing (not shown)