Kimya Black ABS Kevlar 3D Printing Filament - 2.85mm (500g)

Kimya Brand 3D printing filament from Armor Group was developed with end-use performance in mind so that you can spend more time innovating, and less time post-processing your functional parts. Kimya brand filaments have a beautiful surface finish and allow you to take your finished 3D printed parts right off of the print bed, and utilize them straight away in your end-use application. Armor Group’s Kimya ABS Kevlar 3D printing filament is no exception. It provides incredible dimensional stability, low warping, a beautiful finish, and lightweight parts.

Tagged: and ,
Product No. loading...

THE ENHANCED MECHANICAL PROPERTIES OF KEVLAR

This Kimya ABS 3D printing filament by Armor Group is reinforced with Kevlar aramid fibers to give finished 3D printed parts greater strength and dimensional stability; meaning no shrinkage, high impact resistance, and extremely low warping compared to other filaments. You will also find that the added Kevlar fibers produce a beautifully smooth surface finish, so you can take 3D printed parts right off of the print bed, and use them immediately in your end-use application. Because Kevlar is a very lightweight material, models and parts 3D printed using Kimya ABS Kevlar filament will be lighter in weight than the same model printed in regular ABS.

A jig/fixturing part 3D printed with Kimya ABS Kevlar by Armor Group. Note the beautiful surface finish obtained with Kimya brand 3D printing filaments.

TECHNICAL SPECIFICATIONS

  • This material is very abrasive, so be sure to use at least a hardened steel nozzle!
  • Recommended nozzle temperature: 250°C-270°C
  • Recommended bed temperature: 90°C-110°C
  • Printing speed: 50mm/s
  • Download the Technical Data Sheet here!
Back to top
loading...