Liqcreate Resin for SLA & DLP 3D Printers - Hazard Glow (250g)

MAIN FEATURES:

• 385 – 405nm wavelength 3D printer compatibility
• Up to 4 hours glow effect.
• Rechargeable in sunlight, daylight, and artificial light.
• Ideal for outdoor applications
• Smooth surface finish
• Low odor

HOW TO USE:

1. Shake the bottle for at least 60 seconds before use.
2. Allow the resin to rest for 10 minutes after shaking to let air bubbles escape before pouring into resin vat.

Note: This resin can be poured back into the bottle after use, however, it is important to check for residual pieces of polymer before doing so. Always take protective measures when handling Liqcreate resins. For more details on safety please check the attached Safety Data Sheet.

APPLICATIONS:

• Suitable for a wide variety of prints due to its beautiful green-glowing effects
• Prints required to be viewable in the dark

TECHNICAL SPECIFICATIONS:

• Container: Bottle
• Net weight: 250g
• Wavelength: 385- 405nm
• Density: 1.32g/cm

WHY BUY FROM MATTERHACKERS?

At MatterHackers we pride ourselves on offering friendly service, advice, and support. Our prices are always the lowest in the industry when you factor in our free shipping for every item on the MatterHackers site (including 3D printers). Most of all, our staff is friendly and knowledgeable. They have been 3D printing for several years now and are happy to answer your 3D printing questions. Have a question about the amazing capabilities of LIQCREATE Resin for SLA & DLP 3D Printers? No problem. Feel free to give us a call.

In short, buying a 3D printer from MatterHackers is a holistic experience. We are here to partner with you through every step of your 3D printing journey. Additionally, we have all of the PLA, ABS, and Specialty Filament that you could ever need to design anything you can imagine.