Thought3D Magigoo Original - 250ml
All you need for sure adhesion of 3D prints Magigoo is an easy to use 3D printing adhesive designed to address 'the first layer not sticking problem'. Magigoo ensures a strong adhesion to the hot plate. But the magic starts when printing is ready: just wait for the plate to cool down and then remove your prints with just a finger flick! In addition, Magigoo helps to prevent warping. Isn't it magic? Regardless of you being a hobbyist or professional - it is extremely rewarding to have a 30 hour print complete without any warping and having it release easily once cooled.
|Order Now:||Ships calculating... Free U.S. Shipping|
This easy, no-mess solution was born from the frustration almost all 3D printer enthusiasts face; bed adhesion problems, 3D prints stuck to the bed, and warped first layers. The folks at Magigoo have created the easiest, no-mess product on the market to help you overcome all three of these problems! Not only will your 3D prints stick every time, there is no smell, it’s completely safe for the environment, and it cleans up quick and easy with only water or a damp cloth.
Here are the key features of Magigoo Original:
- Over 100 applications
- ABS, PLA, PETG, HIPS, ASA
- Easy application
- Easy release
- Easy clean
- No smell
- No additional tools needed
- Easy to transport
- Nicer print finish
HOW DOES MAGIGOO WORK?
Magigoo Original works with ABS,PLA, PETG & HIPS. The adhesive makes sure prints stick firmly when the print-bed is hot and then releases as soon as it cools down. This unique and innovative mechanism means that no tools are needed to remove prints from the bed. They just pop off when the bed cools down.
HOW SHOULD I STORE MAGIGOO?
Magigoo is best stored upright, with the cap closed and away from direct sunlight. Magigoo was specifically
designed for mobility, which is good news if you want to take it with you on the go.
WHAT ARE THE RECOMMENDED PRINT SETTINGS FOR MAGIGOO?
Magigoo has been designed and tested to work with common plastics. As the composition of each plastic is a little different, the ideal settings for Magigoo may vary. Here are the recommended temperature ranges for effective application.
- PLA 40 - 60 °C
- ABS 90 - 110 °C
- PETG 60 - 85 °C
- HIPS 90 - 110 °C
* may vary for different printers and filament brands
After your prints have finished and popped off, clean the cool printing bed by wiping it with a damp cloth. Use just water.
- (1) Bottle of Magigoo Original - 250ml
Please note that this product is intended for use with the Magigoo Silicone Applicator. The kit is not included.