Thought3D Magigoo Pro PA - 250ml
Nylon filaments prove to be challenging materials for FDM printing due to their lower adhesion to conventional 3D-printing build surfaces and their higher tendency to warp. Furthermore, there are several classes of PA filaments each behaving differently. Magigioo PA is a specialized solution for FDM printing of PA filaments which was developed to work with a wide number of PA types
|Order Now:||Ships calculating... Free U.S. Shipping|
MAGIGOO PRO PA:
Magigoo PA is designed for professional use, to work exclusively with Polyamide filaments. The part should be relatively easy to remove once it cools and the glue residue should also be easily cleaned off.
Here are the key features of Magigoo PA:
- Over 100 applications
- PA12, PA 6, NYLON COMPOSITES
- Easy application
- Easy release
- Easy clean
- No smell
- No additional tools needed
- Easy to transport
- Nicer print finish
WHY CHOOSE MAGIGOO PRO PA?
PA (polyamide) describes a group of polymers with an amide repeat unit. Generally in the FDM industry there are 3 main types of PA which include PA12, PA6,6 and PA6, sometimes these materials can be either grafted with other polymers or else reinforced with glass or carbon fibres. Generally nylons exhibit high strength, toughness, elasticity, wear resistance, chemical resistance and thermal resistance and are widely sought in various industrial applications.
HOW DOES MAGIGOO WORK?
Magigoo PA works with PA6, PA12 and Fiber Reinforced PA's. The adhesive makes sure prints stick firmly when the print-bed is hot and then releases as soon as it cools down. This unique and innovative mechanism means that no tools are needed to remove prints from the bed. They just pop off when the bed cools down.
HOW SHOULD I STORE MAGIGOO?
Magigoo is best stored upright, with the cap closed and away from direct sunlight. Magigoo was specifically designed for mobility, which is good news if you want to take it with you on the go.
WHAT ARE THE RECOMMENDED PRINT SETTINGS FOR MAGIGOO PRO PA?
Magigoo PA has been designed and tested to work with different PA filament brands.. As the composition of each plastic is a little different, the ideal settings for Magigoo PA may vary. Here are the recommended temperature ranges for effective application.
Settings and Recommendations:
- Bed and nozzle temperature: follow filament manufacturer recommendation.
- Increasing nozzle temperature by 5-10°C for the first layer can aid adhesion.
- Some prints may benefit from a 20 mm single-layer brim for optimal adhesion.