MakerGear V4 Nozzle - Brass - 0.35mm

Keep a spare nozzle on hand

The MakerGear M2, M3 or M3 Independent Dual Extruder 3D printer is built to take on the toughest job's you could throw at it. Capable of creating strong and beautiful parts, the stock machine includes a 0.35mm nozzle perfect for most general purpose 3D printing. This nozzle is a direct replacement for the stock unit and is useful to have on hand as a replacement/spare part. This package is a standalone nozzle, which can easily be swapped out to replace the stock unit.

The 0.35mm brass nozzle

Easy to install for a quick upgrade

The nozzle on the MakerGear M2, M3 or M3 ID is incredibly easy to replace. They are constructed with female threads on the nozzle and male threads on the heater block, opposite from many other nozzle manufacturers. The process to replace the nozzle is detailed here:

1. Unload any filament from the printer.
2. Grip the hotend with an adjustable wrench.
3. Use an 11mm wrench to gently unscrew the nozzle.
4. Use the same 11mm wrench to screw the new nozzle on.

This process can be completed with the hotend installed on the machine, or you can remove the entire assembly and swap out the nozzle away from the printer itself.

A view of the hotend with the brass nozzle installed.

Note: This product listing is for a standalone nozzle only!