MatterHackers MatterHackers PRO Resin Cleaner Wash 5L Bottle - 1 Bottle
MatterHackers PRO Resin Cleaner Wash is a precision-formulated post-processing solution designed to rapidly remove photopolymer resin from 3D-printed parts cured at 385nm, 405nm, and 460nm wavelengths. It effectively cleans even the most intricate, detailed geometries while reducing post-cure times and leaving surfaces shiny and dry to the touch. Compatible with a broad range of resins, it's an essential part of any professional resin printing workflow.
- Formulated for 385nm, 405nm, and 460nm photopolymer resins for broad compatibility.
- Rapidly cleans intricate, detailed parts including hard-to-reach cavities.
- Leaves parts shiny and dry to the touch after post-curing.
- Helps reduce overall post-curing times for a faster production workflow.
- Odorless formulation makes your workspace more pleasant.
MatterHackers PRO Resin Cleaner Wash 5L
Exceptional Cleaning Convenience
A highly specialized cleaning solution meticulously designed to enhance the efficiency of your resin-printing workflow. Whether you are producing prototypes, functional components, models, or production parts, MatterHackers PRO Resin Cleaner Wash gives you a dependable solution backed by MatterHackers. Experience a new level of convenience and effectiveness in resin post-processing with this exceptional cleaning solution.
Key Features of the MatterHackers PRO Resin Cleaner Wash 5L:
- Cleans intricate parts exceptionally fast.
- Optimally formulated to leave parts shiny, dry, and print-ready faster.
- Entirely odorless, making it suitable for use in any workspace without the concern of unpleasant fumes.
- Available in 5L to suit both studio and high-volume production needs.
- Easily pour it into your compatible wash container or cleaning station, with no dilution needed.
Optimized for Versatility
MatterHackers PRO Resin Cleaner Wash is engineered to work across most major resin brands, handling materials cured at 385nm, 405nm, and 460nm wavelengths. Whether you're running PRO Series, Formlabs, Liqcreate, or LOCTITE, this cleaner integrates seamlessly into your post-processing routine without switching products.
- Works with UV resins at 385nm, 405nm, and 460nm.
- Compatible with most major material lines.
- Supports professional and high-throughput 3D printing environments.
For Complex, Detailed Geometry
For fine features and hard-to-reach cavities are where lesser cleaners fall short, MatterHackers PRO Resin Cleaner Wash 5L is specifically optimized to penetrate and clean the most demanding geometries. This makes it ideal for dental models, industrial parts, figurines, orthotics, and other precision applications where surface quality is critical.
- Reaches intricate internal channels and fine surface detail.
- Ideal for dental, orthotics, industrial, and figurine applications.
- Removes uncured resin thoroughly without compromising part integrity.
Precision Post-Processing
MatterHackers PRO Resin Cleaner Wash doesn't just clean; it actively reduces post-curing times and delivers a shiny, dry-to-the-touch surface finish right out of the cleaning stage. This speeds up your overall production cycle and ensures parts are ready for inspection, painting, or end-use sooner.
- Reduces time needed in the post-cure stage.
- Parts emerge shiny and dry to the touch.
- Accelerates production turnaround for professional workflows.
Technical Specifications
| Size | 5 L |
| Product type | Resin cleaning and washing agent |
| Physical state | Liquid |
| Appearance | Light red liquid |
| Odor | Odorless |
| Density | 1 g/mL |
| Kinematic viscosity | 9 mm²/s |
| Dynamic viscosity | 9 mPa·s |
| GHS classification | Flammable Liquid, Category 4 |
Please see the Safety Data Sheet for more information.
Wash, rinse, dry, cure
PRO Resin Wash is a TPM-based cleaner that drops into the same workflow as IPA. One step is new: a quick water rinse after the wash. In return you get a bath that doesn't stink up the room, doesn't evaporate away and keeps cleaning far longer.
1. Wash
Fill your wash station or bucket with PRO Resin Wash and wash your parts the way you would in IPA, with the same agitation and the same times.
- Some resins soak up TPM more slowly. If a part still feels slick or shows resin in corners, give it a longer wash.
- Gloves on, and keep the container closed between uses.
2. Rinse in water
This is the step that's new if you're coming from IPA. TPM doesn't evaporate off the part the way alcohol does, so rinse it away in a container of plain water until the slick feeling is gone.
- A few drops of dish soap (under a teaspoon) helps the rinse.
- A cloudy look coming out of the rinse is normal and clears as the part dries.
- Change the rinse water when it stops cleaning: it fills up with TPM over time.
3. Dry completely
Let the part drip dry, then air dry until there's no water or cleaner left on it, inside holes and cavities included.
- A slightly waxy feel until it's fully dry is normal. Some resins keep it until they're cured.
- Compressed air speeds things up on detailed parts.
4. Cure
Post-cure with your resin's normal time and temperature, in a Form Cure or any UV curing station. Nothing changes here.
- Only cure fully dry parts. Leftover cleaner evaporates inside a closed cure chamber and can cloud its reflective walls.
5. Reuse it, then replace it
TPM holds roughly three times as much resin as IPA before it stops cleaning, and it doesn't evaporate out of an open tank, so one fill goes much further.
- Time to replace: a thin film of resin stays on parts after washing.
- Checking with a hydrometer? Replace it above a specific gravity of 1.000. The hydrometer that comes with the Form Wash doesn't read this range; use one that reads 0.962–1.000.
- Never pour it down the sink. Dispose of used cleaner according to local rules.
Why switch from IPA
| PRO Resin Wash (TPM) | Isopropyl alcohol (IPA) | |
|---|---|---|
| Smell | Odorless | Strong alcohol smell that fills the room |
| Fire risk | Combustible liquid (GHS category 4) | Highly flammable (GHS category 2) |
| Evaporation | Stays in the tank | Evaporates from open tanks and off your parts |
| Bath life | Holds about 3× more resin before it stops cleaning | Saturates sooner |
| Extra step | Quick water rinse after washing | None |
| Drying | Air dry fully before curing | Flashes off in minutes |
| Equipment | Same wash stations, tanks and curing units | Same |
Gloves and eye protection for both. Full safety information: see the SDS on this page.
