SeeMeCNC SeeMeCNC Artemis 300 Dual 3D Printer - Fully Assembled
The newest and most powerful delta printer from SeeMeCNC is everything you love about delta printers and so much more! Now Dual Extrusion, with an all-new frame construction built from linear bearing rails, a 32-bit motion controller, the super-intelligent SE300 End Effector (or hotend), and a touchscreen that means business, the Artemis 300 prints faster and better than any delta you've seen before!
Please note that due to the size and packaging of this machine, your item will ship on a pallet via freight, which could extend delivery times. If you are shipping to a residential address, the freight company will call you to schedule a delivery. Shipments made to commercial addresses will be made without the need to schedule a delivery.
The newest delta printer from SeeMeCNC is the amazing Artemis 300, and the fully assembled, ready to print Artemis is upgraded to a dual extrusion machine! It's structurally a beast, since it features precision linear bearing rails on an all new rigid metal frame and it's smart as a whip, with a 32-bit controller with WiFi, a 350W AC auto-leveling, heated bed and an aluminum heat spreader under a borosilicate glass plate. It also includes a new triple-blower hotend, NEMA stepper motors, with options for dual-extrusion and carbon-fiber arms! Would you rather tinker around and build a kit? No problem - the Artemis 3D Printer is available as kit. Find it here.
The Artemis 300 is a fantastic reimagining of what a delta printer can be. After getting feedback from the 3D printing community, SeeMeCNC set out to improve upon almost everything that their previous delta printer models could do.
New Rigid Metal Frame
The motion system consists of linear bearing rails for precise control over movements, which are controlled by the new 32-bit onboard motion controller. The DUET control board is also WiFi enabled, so you can print and monitor the Artemis wirelessly and remotely.
All New Hotend
The redesigned triple-blower hotend gives you the ultimate in control for cooling your prints.
Redesigned Build Plate
The auto-leveling 310mm borosilicate build plate is rated for 350W, and lined with an aluminum heat spreader to get your bed temperature up to temp quick, with no cool spots on the plate.
The Artemis also has 0.9 degree NEMA 17 stepper motors, 16 tooth pulleys, powder-coated sheet metal parts on the base and the upper enclosure, heavy-duty T-slot extrusion towers, all assembled with injection molded plastic components. The Artemis really has been designed for every 3D enthusiast to last.
- Number of extruders: 2
- Interface: USB, SD Card, touchscreen
- 290mm D x 525mm H (PEAK) Maximum Printable X/Y Area
- 290mm D x 500mm H (Perimeter) Maximum Printable X/Y Area
- .005mm MAX XY Resolution
- Minimum Recommended Layer Height w/.5mm nozzle of .1mm
- Maximum Recommended Layer Height w/.5mm nozzle of .4mm
- Maximum Recommended Printing Speed @.2mm Layer Height 100mm/s
- Maximum Usable Printing Speed @.2mm Layer Height 150mm/s
- Filament: 1.75mm PLA, ABS, PETG, HIPS, NinjaFlex SemiFlex
- Max Heated Bed Temp 120C
- Max Travel Speed 400mm/s*
- Hotend Temp 280C
- Power Requirements 110VAC @ 350 watts (not 220V compatible)
- Overall Printer Weight: 46lbs
- Overall Printer Footprint: 17.5in Depth x 20in Width
- Overall Printer Height: 41.5in