Slice Engineering Slice Engineering Creality Ender Upgrade Kit

Unlock the full potential of your Creality Ender 3 printer with the Copperhead® Hot Block and C-E Heat Break. We outfit 3D printers with premium engineering-grade components that drastically improve performance.

This plug-and-play upgrade kit can help you melt plastic faster with our quick-heating copper hot block and minimize clogging with our bimetallic heat break. This easy-to-install upgrade results in less downtime, less wasted filament on failed prints, less tinkering, increased throughput, and better bridging performance (thanks to the BridgeMaster® Nozzle).

List Price: $99.99
Price: $99.99
Price: $...
Order Now: Ships calculating... MatterHackers Shipping Truck Free U.S. Shipping
Qty
loading...
Available Add-ons (1)
Price: FREE
Show More Addons
Product No. M-Z0Z-QJ3X

Plug-and-Play Design


The Creality Ender Upgrade Kit is a drop-in, plug-and-play replacement for the stock Creality and Ender hotends. Utilizing the stock heat sink, heater, and sensor makes installation a breeze, allowing you to reap the benefits of the Copperhead hotend with minimal printer downtime. Alternatively, you can upgrade to our 50 W Heater and 300°C Thermistor.

Bimetallic Heat Break


Copperhead Bimetallic Heat Breaks are 60% more efficient at heat creep reduction than monolithic designs. Using the same high-strength copper alloy designed for optimal thermal conductivity found in Mosquito Heat Breaks, Copperhead Heat Breaks boast a higher temperature rating and flow rate potential over PTFE-lined heat breaks.

Super-Conductive Hot Block


The Copperhead Hot Block is named for its hardened, nickel-plated, copper alloy construction. Rated to 450°C, Copperhead enables printing of nearly every commercially available filament, from basic PLAs to medical-grade PAEKs. The hot block design isolates the sensor from the heater with a physical air gap, improving the temperature feedback loop, and features convenient wrench flats to simplify nozzle changes.

Creality Ender Upgrade Kit Includes

  • Copperhead Hot Block
  • Copperhead Heat Break - C-E
  • GammaMaster Nozzle - 0.4 mm
  • Copperhead Silicone Boot
  • Boron Nitride Paste - 1 cc
  • Optional 50W Heater/300°C Thermistor
  • Dowel Pin (for filling in extra space in the thermistor slot)
  • Gourmet Orange Creamsicle Lollipop
  • Slice Engineering Sticker

Compatible with:

  • Ender-2
  • Ender-3 / Ender-3 Max / Ender-3 V2 / Ender-3 Pro
  • Ender-5 / Ender-5 Pro / Ender-5 Plus
  • Ender 6
  • CR-10 V1 / CR-10S / CR-10-S4 / CR-10-S5 / CR-10 Mini
  • CR-20 / CR-20 Pro
  • Other: Tevo Tornado / LONGER LK5 PRO / Tronxy X5S

Heater and Sensor Compatible with:

  • Ender-3 / Ender-3 V2 / Ender-3 Pro
  • Other Creality printers may require applying new connectors to the heater and/or sensor to allow for installation in the desired printer's motherboard

Notes:

  1. A stock or aftermarket Creality Ender 3 heat sink (with a set screw that accepts the stock Creality heat break) is required for this upgrade kit to work.
  2. If you are ordering the Copperhead® - 50W Heater/300°C Thermistor variant of this product, the Boron Nitride Paste is preapplied and not included as a separate product.

Notify me when this item becomes available

Available Financing

Back to top