Sorry, this product is currently unavailable
Perhaps some of these categories are of interest:
Ultimaker Advanced 3D Printing Kit - Ultimaker 3
The Advanced 3D Printing kit for the Ultimaker 3 includes an enclosure door and adhesive sheets for the build plate to help with warping issues when printing with materials like ABS and Nylon. The kit also includes an additional glass plate.
- Keeps build area warm for better ABS and Nylon printing
- Adhesion sheets for increased build plate adhesion
- Extra glass plate included
Enhance your Ultimaker 3 experience
The Advanced 3D Printing kit brings two major changes to your Ultimaker 3; a door and bed adhesion sheets. The enclosure door will keep the build area warmer while printing, helping materials like ABS and Nylon warp less. The adhesive sheets for the build plate provide increased adhesion over glue stick and also support multiple jobs before needing to be replaced. This kit also includes an additional glass plate - useful for swapping out surfaces between prints or having one with an adhesion sheet and one without.
Keep it hot
Some 3D printer materials like ABS and Nylon need to be cooled slowly to stop your part from warping after printing. The partially enclosed design of the Ultimaker 3 makes it a great choice in 3D printer when using ABS but larger parts can still see warping being an issue. The included front enclosure panel adds a door to the Ultimaker 3 for a more consistent temperature in the build area. This reduces the chances of warped prints even more and leads to much more successful printing.
Make it stick
Getting the first layer right is vital to a successful 3D printing experience. Some materials feature easier bed adhesion than others, and materials like Polypropylene will need some extra help beyond a glue stick. The adhesion sheets included in the Advanced 3D Printing Kit are easy to apply, offer much greater first-layer adhesion than base glass and will stay strong for many prints. Also included is a scraping tool for adhesion sheet application without any air bubbles.
2nd build plate for maximum uptime
The final component of the Ultimaker 3 Advanced 3D Printing Kit is a second glass build plate. To maximize your machine time you can remove the entire build plate after a completed print and install the clean plate for the next print. Then remove the print and clean the build plate while your next project is underway! This kit included 25 adhesive sheets, so there is plenty of stock for both build plates.
- 1 Front Enclosure
- 25 Adhesion Sheets
- 1 Adhesive Applicator
- 1 Glass Plate
|Material||Front enclosure||Adhesion sheet|
|CPE+||Highly recommended||Highly recommended|
|PC||Highly recommended||Highly recommended|
|TPU 95A||Optional||Not advised|