Sorry, this product is currently unavailable
Alternative products you may be interested in:
Uniz Uniz zPMMA Resin - Clear Translucent - (500ml)
zPMMA resin from UNIZ is an engineering grade photopolymer resin designed for use on UNIZ Slash 3D printers. Models printed using this resin will display properties such as high impact resistance, good thermal insulation, resistance to weathering and scratching, chemical resistance, and a transparent finish.
APPLICATIONS AND USES FOR ZPMMA RESIN
zPMMA translucent resin is designed for use in projects that require models to feature a transparent finish while also displaying mechanical properties such as high rigidity, tensile strength, and flexural modulus. Belonging to the Methacrylate category of engineering plastics, zPMMA will display characteristics such as high impact resistance, thermal insulation, resistance to chemicals, excellent resistance to weathering and scratching, and a high level of translucence. Industries that currently use zPMMA include:
- S.T.E.A.M. Education
- End-use parts
- Art & Design
- Teaching guides
- General-use 3D Printing
Combining a high level of translucency with its valid mechanical properties – parts printed using zPMMA are more than capable of being used for end-use parts.
- Container: Bottle
- Technology: LCD
- Material: Photopolymer
- Wavelength: UV 405nm
- Volume: 500 ml
- Machine Compatibility: Slash Plus, Slash PRO, Slash DJ2
- Colors: Clear Translucent (uncured)
This cured 3D printed bottle was printed using zPMMA resin. Cured prints will display increased mechanical strength, higher flexural strength, and will acquire a soft yellow finish.
TAKE FULL ADVANTAGE OF THE UNIZ SLASH’S UNIQUE RESIN LOADING SYSTEM
Uniz Resin bottles are designed to be easy to use and incredibly intuitive. Simply remove the cap from the resin bottle, while making sure that the side slots are aligned proceed to insert the resin bottle vertically into the resin mount, and continue to press down on the resin bottle until the needle located in the mount has pierced into it completely. Once these steps have been completed proceed to pierce the vent hole on the bottom of the bottle to allow airflow and your resin tank will do the rest!