The Wham Bam Flexible Build System improves your 3D printing experience with their specially formulated PEX Polymer Build Surface, paired with the Wham Bam Flexi build plate and Wham Bam magnetic base you can simply pop the finished 3D print by removing the Flexi Build plate from the Magnetic base. Your 3D printing experience is about to "pop off" literally and figuratively!
|Order Now:||Ships calculating... Free U.S. Shipping|
Size: 470mm x 470mm (18.5" x 18.5")
Compatible 3D Printers include: Creality CR-10 Max
A specially formulated surface that attracts any filament
The Wham Bam PEX Build Surface is a specially formulated polymer with a higher melt point than even PEI, attracting almost any filament without damaging the surface or 3D print. Once you finish a print you can easily wipe the surface with alcohol or prep your PEX build surface with the Steel Wool 000 provided with this system for your next print. The PEX surface comes with a high temperature 3M adhesive you stick to the Wham Bam Magnetic Base.
Easily pop off your finished prints with the Wham Bam Flexi Plate & Magnetic Base
With the strong PEX build surface, the perfect accompaniment is the Flexi Plate allowing you to easily remove from the magnetic base and flex to pop off your 3D print. The Flexi plate is made from high-quality spring steel for endless bends with no kink or warp and formulated with chromium alloy to be rustproof. Heat your bed to high temp for specialty filaments without concern, the magnetic base is designed to resist up to 150°C.
WHAT’S IN THE BOX?
- 1 x Wham Bam Flexi Magnetic Base
- 1 x Wham Bam Flexi Build Plate
- 1 x Wham Bam PEX Build Surface (Pre-Installed on the Flexi Build Plate)
- 1 x Steel Wool 000