3D Gloop! 3D Gloop! PLA Glue Gloop Squeeze Tube - 15ml

PLA Glue Gloop is designed specifically for bonding prints together! Based on the same PLA 3D Gloop formula, glue gloop is thicker and packaged in a syringe tube for precision applications.

Note: 3D Gloop! is designed to work on glass and mirror surfaces. It is not recommended for use on PEI coated build platforms or any textured print surface as it will likely permanently fuse to it.

List Price: $11.99
Product No. M-F6Z-GT5R

Disclaimer: Be sure to use 3DGloop! in a well-ventilated area and to wear PPE (Personal Protective Equipment) when using this product. 


Say goodbye to weak or flimsy bonds! With 3D Gloop! simply apply a small amount of Gloop to your print bed or to the bonding surface of parts you wish to fuse to achieve seriously strong adhesion.

To fuse parts simply apply 3D Gloop!, press and hold together for 15-30 seconds to achieve a strong tack hold. Bonds will achieve 80% strength after an hour and full strength within 6 hours of application.

Note: Bonding times will vary depending on bonding surface size and application amount.



    Want to bond ABS and PLA prints together? No problem!

    Either formulation of Glue Gloop works great when bonding ABS to PLA or vice-versa. It is recommended that the appropriate formulation of Gloop is used on each bonding surface in order to guarantee the strongest possible bond.

    California Prop 65 Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm.

    Material Safety Data Sheet

    Notify me when this item becomes available

    Available Financing

    Back to top