|Order Now:||Ships calculating... Free U.S. Shipping|
Reason for Clearance: This item is being discontinued.
Disclaimer: Be sure to use 3DGloop! in a well-ventilated area and to wear PPE (Personal Protective Equipment) when using this product.
Say goodbye to weak or flimsy bonds! With 3D Gloop! simply apply a small amount of Gloop to your print bed or to the bonding surface of parts you wish to fuse to achieve seriously strong adhesion.
To fuse parts simply apply 3D Gloop!, press and hold together for 15-30 seconds to achieve a strong tack hold. Bonds will achieve 80% strength after an hour and full strength within 6 hours of application.
Note: Bonding times will vary depending on bonding surface size and application amount.
Want to bond ABS and PLA prints together? No problem!
Either formulation of Glue Gloop works great when bonding ABS to PLA or vice-versa. It is recommended that the appropriate formulation of Gloop is used on each bonding surface in order to guarantee the strongest possible bond.
California Prop 65 Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm.
Put simply, MatterHackers is the smart place to shop for all things 3D printing and digital manufacturing. The MatterHackers pros are here to partner with you through every step of your journey turning idea into reality and here are just a few of the perks you’ll receive as a customer:
Have a question about this MatterHackers 3D Gloop! ABS Glue Gloop Squeeze Tube - 15ml - Clearance? Looking for a recommendation? No problem. Feel free to contact us.