Inventables Inventables X-Carve Upgrade Kit
Increase the rigidity, torque, and material removal rate of your 1000mm X-Carve with this upgrade kit! With an installation time of roughly 2 ½ hours you can reduce chatter and increase the accuracy of your X-Carve — taking your workflow to the next level.
|Order Now:||Ships calculating... Free U.S. Shipping|
- 9mm 3GT belting (3.5 meters)
- 9mm Belt Clips (6)
- 9mm Belt Sleeves (6)
- 9mm wide belt idlers (6)
Stepper Motor Upgrades:
- 212 oz-in NEMA 23 stepper motors (4) for 50% more torque
- Direct Drive Z Axis Upgrade
- 2" Risers (4)
- Acrylic dust guards (8)
- Around 2 1/2 hours
Material removal rate:
- Typically 3x improvement from stock X-Carve
UPGRADE KIT BENEFITS:
- Increases material removal rate up to 3x faster than the base model X-Carve.
- Nearly doubles the carvable work area.
- Increases gantry clearance from 2.5” to 4.5”in
- Increases maximum pass-through sheet width from 34.75” to 37”
- Upgrades motors for more than 50% more torque
- Replaces the 6mm wide 2GT belts with 9mm wide 3GT belts
- Improves accuracy and reliability
- Reduce adjustments and maintenance needs
- Unique shape prevents potential interference with dust boot when the machine is at XY home
- Keeps shavings within the work area of the machine.
Note: X-Carve machines purchased in 2015 or earlier will need updated X, Y1, Y2, and Z stepper motor cable assemblies.