Modix BIG-60 Motion System and Dual Direct Drive

Upgrade your Modix BIG-60 v2 to V3 with this Motion System and Dual Direct Drive add-on!

Note: This item is only compatible with Modix BIG-60. The current generation version (v3) of this Modix 3D Printer DOES NOT need this upgrade. This upgrade is made-to-order, delivery lead times may vary depending on availability.

Product No. M-823-VT2L

NOTE: Items are shipped from Hong Kong. Pricing does not include customs, taxes, or import & brokerage fees. Customers are responsible for these additional fees which will be collected on delivery.

THE MOST IMPORTANT UPGRADE FOR YOUR OLDER GENERATION MODIX 3D PRINTER

This optional upgrade was designed for older generations of the Modix BIG-60. With this upgrade, your v2 will be upgraded to v3.

UPGRADE TO YOUR V2 TO V3:

This upgrade for your V2 Modix 3D Printer will enable you to achieve the following:

  • Replace the X shaft with two motors, one for each X axis belt.
    This configuration can provide the required torque to move the heavier print head configuration, the added weight of the secondary extruder and extruder motor.
  • New mounting for the extruders. This new mounting places the two extruders side by side in a dual direct-drive mode. This configuration provides higher accuracy with dual-extrusion printing.
  • A new mounting system for the X and Y axis drag chains reduces vibration and provides more accurate printing.
Note 1 – the new motion system brackets reduce the total Y axis movement from 610 mm to 590 mm.

Note 2 - this upgrade requires the Electronic Controller and Touch Screen upgrade as well
Back to top
loading...