Pulse High Speed 3D Printing Expansion Pack for 8-bit

New

The Pulse 3D Printing Expansion Pack streamlines your success with specific special FDM filaments and expands the capabilities of your Pulse 3D Printer by bundling carefully curated accessories and materials in one convenient pack.

Top Pulse 3D Printing Expansion Pack Features:
• Items Needed for Printing Success
• Specialization in Specific Materials & Applications
• Top Quality Accessories and Materials
• Streamlines Expanding Pulse Printer Capabilities
• Curated and Approved by the Pros at MatterHackers

Tagged: and ,
Product No. loading...

Pulse 3D Printing Expansion Pack 

Special Packs Designed for Special FDM Materials

The Pulse 3D Printing Expansion Pack is a curation of FDM accessories and materials tested—and approved—in expanding your Pulse 3D Printers capabilities to succeed with specific special materials and applications.

Key Features of the Pulse 3D Printing Expansion Pack: 

  • Curated Items That Optimize Printing Setup
  • Takes Guesswork Out of Figuring Out What's Needed to Succeed
  • Accumulates Essential Components and Accessories in One Place
  • Deep Cost Savings When Purchasing These Essentials in a Pack
  • Includes Items Produced By Reliable Manufacturers
  • Boosts Confidence with Printing Specific Materials
  • Increased Success with This Pack—Guaranteed

Success Served in a Pack

The Pulse 3D Printing Expansion Pack contains all the essential items for succeeding from the get-go with specific FDM materials and applications on a Pulse. Every pack contains one:

  • SNAP Quick-Change Tool Head
  • LayerLock Build Surface/Plate
  • Spool of Filament
  • Additional Items (Varies Between Materials)
Dentist Interview

Thermoformed Braces

Substantial Savings on Critical Components

Purchasing these essential components and materials in a pack gives you a fantastic discount so you save on more than just time and effort.

  • Exclusive Big Discounts with Through Packs
  • Save Money in Addition to Time and Effort
  • Packs Only Contain Pertinent Components and Material
  • Every Penny Goes Towards Essential Items

Quality Components And Materials Approved By the Experts

Print with confidence knowing that the Pros at MatterHackers have chosen, tested, and approved everything in this pack that's chock-full of top-quality items.

  • Contains Professional-Approved Items
  • Produced by Industry-Leading Manufacturers
  • Get Quality Results from Quality Components
  • Feel Comfort & Confident in This Thoughtfully Curated Pack
Dentist Interview

Thermoformed Braces

One-Stop-Product for All the Essentials

Find all the essential accessories, tools, and materials that start you on the right path to successfully printing with specific materials.

  • Picked by the Experts—Avoid Guessing What's Needed
  • All Products Found Here—No Scavenger Hunt Necessary
  • Order Everything with a Single "Add-to-Cart" Click

What's In the Pulse 3D Printer Expansion Pack?

ABS HIGH SPEED METAL
1 x SNAP EV6-HDS 0.4 Tool Head* 1 x SNAP MAG-VAN 1.2 Tool Head* 1 x SNAP EV6-DMD 0.4 Tool Head*
1 x LayerLock Powder Coated PEI Build Plate 1 x LayerLock Powder Coated PEI Build Plate 1 x Glass Plate w/ LayerLock Build Plate
1 x Spool of PRO Series ABS 1.75mm (1kg)* 1 x Spool of PRO Series PLA 1.75mm (5lb)* 1 x Spool of BASF Ultrafuse 17-4 PH Metal 1.75mm (1kg)
1 x Pulse Enclosure (Black) 2 x BASF Ultrafuse 17-4 PH Processing Tickets (Standard)
1 x Dimafix Adhesive Pen

The Ultimate Pack contains all of the items listed in the table above.

*PRO Series filament color may vary from the photo depending on inventory stock during time of purchase.

TECHNICAL SPECIFICATIONS OF ITEMS IN THE PULSE EXPANSION PACKS

  • SNAP EV6-HDS 0.4 Quick-Change Tool Head
    • Hotend: E3D V6 (1.75mm)
      • Operating Temperature: Up to 290°C +/- 5°C
      • Specialty: Reliably Prints More than PLA & PETG
    • Nozzle Type & Size: Hardened Steel 0.4mm
      • Specialty: Withstands Abrasives; Lasts a Long While
    • Pulse Printer Compatibility: Any Bowden Pulse 3D Printer manufactured starting mid-April 2021
  • SNAP EV6-DMD 0.4 Quick-Change Tool Head
    • Hotend: E3D V6 (1.75mm)
      • Operating Temperature: Up to 290°C +/- 5°C
      • Specialty: Reliably Prints Most Materials
    • Nozzle Type & Size: Diamond 0.4mm
      • Specialty: Withstands Abrasives; Ultimate Wear-Resistance; Best Thermal Conductivity
    • Pulse Printer Compatibility: Any Bowden Pulse 3D Printer manufactured starting mid-April 2021
  • SNAP MAG-VAN 1.2 Quick-Change Tool Head
    • Hotend: Mosquito Magnum (1.75mm)
      • Operating Temperature: Up to 290°C +/- 5°C
      • Specialty: Reliably Prints Most Materials quickly
    • Nozzle Type & Size: Vanadium 1.2mm
      • Specialty: Withstands Abrasives; Great Wear-Resistance; Good Thermal Conductivity
    • Pulse Printer Compatibility: Any Bowden Pulse 3D Printer manufactured starting mid-April 2021
  • LayerLock Powder Coated PEI Build Plate
    • Dimensions: 9" x 10" (extra 0.5" with tabs)
    • Operating Temperature: Up to 120°C
    • Magnetic bed required
  • Glass Plate w/ LayerLock Build Plate
    • Dimensions: 9" x 10" (glass) / 9.5" x 10" (LayerLock Build Plate)
    • Glass Plate attached to LayerLock Spring Steel Build Plate via adhesive
    • Operating Temperature: Up to 120°C
    • Magnetic bed required
  • PRO Series ABS 1.75mm (1kg)
  • PRO Series PLA 1.75mm (5lb)
    • Recommended Printing Temperature: 220±10°C
    • Recommended Print Bed Temperature: 60°C
    • Dimensional Accuracy: ±0.02mm
    • Density: 1.25 g/cm³
    • 5lb Spool Dimensions (Approx.): 266mm Outer Diameter x 43mm Inner Hole Diameter x 93mm Height x 6mm Flange Thickness
    • 5lb Spool Volume: 1.80 L
    • 5lb Spool Length: 754.2m
    • Download the Technical Data Sheet
    • Download the Safety Data Sheet
  • BASF Ultrafuse 17-4 PH Metal 1.75mm (1kg)
    • Recommended Extrusion Temperatures: 230 - 250 °C
    • Recommended Bed Temperature: 100 - 120°C
    • Recommended Print Surface: Glass Bed with Dimafix Bed Adhesive
    • Recommended Nozzle: Any Abrasion Resistant Nozzle
      • Make sure your nozzle is 100% purged of other filaments before printing
    • Density: 7800kg/m³
    • Filament Diameter: 1.75mm
    • Spool Size: 1kg
    • Print Speed: 15 - 40mm/s
    • Part Cooling: None
    • BASF Ultrafuse 17-4 PH TDS
  • BASF Ultrafuse 17-4 PH Processing Ticket (Standard)
    • Parts will return to the customer between 2 - 5 business days AFTER green parts have been debound and sintered. Time of delivery will be based on the sender address' location in proximity to DSH's facility.
    • This processing ticket only covers return delivery within the U.S. Additional shipping charges may be applied to customers outside of the U.S. If you want to use a processing ticket and live outside of the U.S., please contact support@matterhackers.com for options.
  • Pulse Enclosure (Black)
    • Color: Black
    • External Dimensions: 21.5" x 22.5" x 23.5"
    • These dimensions do not include optional additions/modifications such as attaching 60mm fans or mounting the BOFA 3D PrintPro 3 Fume Extractor.
    • Fits a printer no larger than 559mm (22 in) deep by 464mm (18.25 in) wide by 584mm (23 in) tall.
      • This measurement includes wires protruding from the printer at maximum X, Y, and Z height.
    • No glue required for assembly
    • No drilling, cutting, or other modifications to the printer itself are required
  • Dimafix Adhesive Pen
    • Ideal for Metal and Polycarbonate 3D printing filaments printed on glass
    • Instructions on proper application can be found here
Back to top
loading...