The Ultimaker 2 Extended+ is the largest printer in the Ultimaker family. Start printing anything you can imagine with 9" x 9" x 12" of build space to play with. This printer is designed to be one of the simplest, most dependable, and easiest printers to use on the market. The Ultimaker 2 Extended + is a high definition printer that will continuously turn out well printed parts. Once you unbox the printer, you will be up and printing in a matter of minutes.
We are excited to be one of the few authorized US resellers of Ultimaker. Ultimaker has developed a global reputation and following for having printers that work very well and require very little tinkering. The claim to fame for this printer is the massive build volume (9 x 9 x 12) coupled with its remarkable ease of use. Even a novice can begin printing expert parts on this printer within moments after unboxing. The well designed print head on this printer will quietly and accurately build your creation with an accuracy of 20 microns. This leads to a printed part with a very smooth finish without highly visible print lines. The heated bed allows you to print with a variety of materials and rarely needs to be re-calibrated. This printer comes standard with a 12 month warranty so you can rest easy and know you're covered.
Designed to Simply Work
Once you pull your Ultimaker 2 Extended+ out of the box, you're ready to start printing. The Ultimaker 2 Extended Plus comes with a radial scroll wheel which allows you to make temperature and print speed adjustments during your print. You'll never have to worry about long print jobs - this machine was designed and tested to finish the job without failed prints.
What's New in the Extended+?
Geared Feeder - This innovative feeder will allow you to quickly swap filament and even choose the correct pressure for your filament.
Swappable Nozzles - The pre-installed Olsson Block allows you to easily switch between 4 different sizes of nozzles (0.25, 0.40, 0.60, 0.80mm)
Optimized Airflow - New fancaps have been installed to perfectly aim airflow below the nozzle from both sides.
What's In The Box?
- Ultimaker 2 Extended + 3D Printer
- Swappable 0.25, 0.40, 0.60, 0.80 mm nozzles
- 0.75kg spools of Ultimaker Silver PLA
- SD Card and USB Cable
- Other free extras include: Glue stick, grease, hex wrenches, calibration card, and more!
Printing Technology - Fused Filament Fabrication
Printing Material - 2.88mm PLA, 2.88mm ABS, Specialty Materials
Nozzle Speed - 30 - 300 mm/s
Build Volume - 9" x 9" x 12"
Layer Resolution - 0.25 mm nozzle: 150 to 60 micron
0.40 mm nozzle: 200 to 20 micron
0.60 mm nozzle: 400 to 20 micron
0.80 mm nozzle: 600 to 20 micron
Printer Dimensions - 19.37"x 13.46"x 21.97"
Printer Weight - 23.8 lbs
Connectivity - USB, stand alone with SD-card
Printer Software - MatterControl
Input Voltage / Power - 100-240 Volts, at 50/60 Hz 24 v DC @ 9.2 amps
Note on Filament Compatibility
Ultimaker's PTFE tubing has issues fitting some 3mm filament, depending on their true diameter and/or a wide dimensional accuracy. For PLA and ABS, we highly recommend our PRO Series, which has a true diameter of 2.88mm and an accuracy within 0.05mm.
Which Ultimaker is Right for Me?
|Printer||Price||Build Area||Extrusion||Prints Flexibles||Status|
|Ultimaker 3||$3,495||8.5x8.5x8in||Dual||Yes||Current Model|
|Ultimaker 3 Extended||$4,295||8.5x8.5x12in||Dual||Yes||Current Model|
|Ultimaker 2 +||$2,499||9x9x8in||Single||Yes||Current Model|
|Ultimaker 2 Extended +||$2,999||9x9x12in||Single||Yes||Current Model|
|Ultimaker 2||$1,899||9x9x8in||Single||No||Retired Model (Still Available on MatterHackers.com)|
|Ultimaker 2 Extended||$2,299||9x9x12in||Single||No||Retired Model (Still Available on MatterHackers.com)|
|Ultimaker 2 Go||$1,199||5x5x5in||Single||No||Current Model|
|Ultimaker Original+ Wood Kit||$995||8x8x8in||Single||No||Current Model
Why Buy From MatterHackers
At MatterHackers we pride ourselves on offering friendly service, advice and support. Our prices are always the lowest in the industry when you factor in our free shipping for every item on the MatterHackers site (including 3D printers). Most of all, our staff is friendly and knowledgeable. They have been 3D printing for several years now and are happy to answer your 3D printing questions. Have a question about the amazing capabilities of your new Ultimaker? No problem. Feel free to give us a call.
In short, buying a 3D printer from MatterHackers is a holistic experience. We are here to partner with you through every step of your 3D printing journey. Additionally, we have all of the PLA, ABS, and Specialty Filament that you could ever need to design anything you can imagine.