Thought3D Magigoo PA 3D Bed Adhesion Solution for Nylon
Magigoo has addressed "the first layer not sticking problem" for NYLON! Designed to work exclusively with Polyamide filaments - this adhesive ensures that 3D prints stick firmly to the print bed when hot and removes easily once the bed has cooled.
DESIGNED SPECIFICALLY FOR NYLONS
Nylon filament is well known for being an incredibly strong, durable, and versatile material. Whether you’re printing with standard Nylon filament or Nylon that has been reinforced with glass or carbon fibers, first layer print adhesion is essential if you wish to be successful with this material.
That’s where Magigoo for Nylon comes into play. Magigoo-PA is a specialized solution for FDM printing of PA filaments developed to work with a wide variety of PA types. Directly aimed at addressing the common problem of warping, Magigoo PA helps to increase overall print adhesion when printing Nylon without a Garolite print surface.
NON-TOXIC AND ODORLESS
This Magigoo stick won't stink up your workspace with nasty chemical smells.
You can get over 100 applications from one 50ml tube of Magigoo.
EASY CLEAN UP!
Magigoo cleans up with just a damp cloth or water.
USABLE ON ANY SURFACE
Magigoo for Nylon can be used on glass or a multitude of other surfaces. To provide maximum adhesion and prevent printed parts from fusing to surfaces, it is recommended that Magigoo PA be applied to all build surfaces.
HOW TO USE
- Shake the bottle
- Apply to the desired area by pressing the nib on the bed (activates the inner valve)
- Print according to filament / printer manufacturer recommendation
- Allow to cool and remove. The print should pop right off
- Clean using a damp cloth