ColorFabb ColorFabb Light Blue XT PETG Filament - 1.75mm (0.70kg)
ColorFabb's XT series is a PETG filament that boasts excellent properties such as high strength, toughness, low odor, good temperature resistance, styrene free formulation, FDA food contact compliance, and BPA free formulation.
ColorFabb's XT series is a PETG filament. It is strong, quite flexible, and some find it easier to work with than ABS since it barely shrinks or warps at all. This makes it great for both beginners and advanced users.
ColorFabb's XT series does not require a heated bed, but it does work best with one. If working with a non-heated bed, place blue painter's tape to help with adhesion.
White it’s not commonly known, it is possible to post process ColorFabb's XT series. An acetone vapor bath can increase transparency and increase flexibility. However, the opposite effect can occur if your print is thick. Flexibility will still increase, but putting thick parts in an acetone vapor bath can cause the print to look cloudy. Print lines will vanish with all print sizes.
- Works best with a heated plate
- If you do not have a heated plate, use blue painters tape with no cooling fan for the first few centimeters of your print.
- Print Temp: 240-260C
- Print Speed: 40-70 mm/s
- Diameter Tolerance: +/- 0.05mm
- Density: 1.370 g/cm3