MatterHackers LayerLock Powder Coated PEI Build Plate

Clearance

LayerLock Powder Coated PEI Build Plate optimizes successfully 3D printing standard filaments through strong first layer adhesion thanks to its powder-coated PEI textured surface.

Top LayerLock Powder Coated PEI Features:
Ideal for Popular Materials - PLA, ABS, and PETG stick very well
Increase 3D Printing Success - Ideal surface for common filaments
Long-Lasting Surface - Double-sided plate lasts for thousands of prints
Save on Replacements - Reduce replacing build sheets with a robust plate

This product requires your printer to have a magnetic base installed in order to properly use this build plate as intended.

loading...
Product No. loading...

LAYERLOCK POWDER COATED PEI BUILD PLATE 

STANDARD MATERIAL 3D PRINTING MADE EASY

LayerLock Powder Coated PEI Build Plate delivers consistently strong bed adhesion with standard 3D printing materials. Succeeding with common filaments such as PLA, ABS, and PETG just got a lot easier with this strategically designed build plate.

Key Features of LayerLock Powder Coated PEI: 

  • Produces a beautiful textured first-layer print surface
  • Ideal for Printing PETG, PLA, and ABS Filaments
  • Durable Double-Sided Long-Lasting Surface
  • Decreases Warping
  • No additional print removal tools needed

Layer Adhesion Locked Down

LayerLock Powder Coated PEI Build Plate is engineered to reliably lock down the adhesion bond between the build surface and a print's first layer.

  • First layers lock onto powder-coated PEI surface
  • Save time, money, and resources thanks to reduced failures from warping and weak adhesion
  • Learn how to succeed with a powder-coated PEI surface via this article
Beautiful NylonX printed on a LayerLock Garolite build surface

Thermoformed Braces

Robust Build with Room for Flexibility

This LayerLock build plate is powder coated with PEI on both sides for a robust surface that'll last twice as long. Because the plate is made of spring steel, there's enough flexibility to pop prints off with a bend, making part removal easier than ever.

  • Engineered to last thanks to its double-sided powder-coated application
  • Spend less on replacing temporary build sheets
  • Remove prints off the bed without any need for sharp removal tools

Unique & Useful First Layer Surface

The powder-coating application of this LayerLock PEI Build Plate produces a rugged texture that adds a charming and useful quality to your print.

  • Produce prints with first layers that stand out from the rest
  • Enjoy the mesmerizing texture that can also hide many small first layer flaws
  • Find utility in a bumpy texture that's useful for purposes such as reducing slippage on the first layer
A NylonX print successfully printed on a LayerLock Garolite Build Surface for the Ultimaker 3D printer

What Materials are Compatible with LayerLock Powder Coated PEI Build Plate?

Compatible Material Z-Height Sensitive
PLA
ABS
PETG
RYNO
TPU / TPE
PVA

* Optimal nozzle height is crucial for these materials to avoid infusing prints into the build surface.


How Do You Install and Maintain LayerLock Powder Coated PEI Build Plate?

INSTALLATION

  • Attach and align plate onto magnetic base
  • Calibrate Z-height
  • Level print bed

That's it! You're ready to print. For a more detailed walkthrough on "How to Succeed" with a powder-coated PEI plate (installing, printing, maintenance, or troubleshooting), check out our article here!

MAINTENANCE

  • Do NOT print too low with PETG, RYNO, TPU, and TPE.
    • Remove prints extruded out of these materials while the bed is still heated at 60°C.
  • Remove PLA and ABS prints from the build plate AFTER the bed has cooled down.
  • Do NOT over flex the spring steel plate. Minor flexing should suffice.
  • Do NOT use a sharp scraper to remove prints off the surface.
  • Re-calibrate your z-height and re-level your bed whenever you make large changes to your print settings such as print speed, layer height, bed and nozzle temperature, etc.

Person removing a PRO Series Tough PLA printed part off a LayerLock Garolite Build Surface that comes stock with the Pulse XE 3D Printer


What Sizes are Available for LayerLock Powder Coated PEI Build Plate?

9.5" x 10" (241mm x 254mm)
Length x Width Printer Compatibility*
8" x 8" (203mm x 203mm)
9.25" x 9.25" (235mm x 235mm)
*plus about 10mm along length for tabs
10.14" x 10.51" (257.5mm x 267mm)
*plus about 10mm along length for tabs
11.8" x 11.8" (300mm x 300mm)
*plus 10mm along length for tab
12" x 12" (304mm x 304mm)
*plus 10mm along length for tab
13.78" x 13.78" (350mm x 350mm)
*plus 10mm along length for tabs
14.84" x 14.57" (377mm x 370mm)
*plus 10mm along width for tab

*This is compatibility in terms of size. It is up to the user to confirm that their printer has the necessary magnetic base to properly use this build plate.


LayerLock Powder Coated PEI Build Plate Technical Specifications

  • Surface Material: Powder Coated PEI
  • Texture: Bumpy
  • Double-Sided: Yes
  • Build Plate Material: Spring Steel
  • Recommended Max Operating Temperature: 120°C (248°F)
  • Thickness: 0.031" (0.8 mm)
  • Surface Area: Varies. See Table above for surface areas of specific options.

Why Are Items on Clearance?

At MatterHackers, to bring you new and exciting products, we occasionally shift some of our quality stock to the Clearance section.

Reasons for Clearance Items:
  • New Product Versions: When manufacturers release updated versions of printers, CNC machines, filament, etc., the older versions typically go to Clearance.
  • Overstock: Items we have in excess are moved to Clearance to free up warehouse space.
  • Discontinuation: Discontinued product lines often end up in Clearance to expedite the sale of remaining stock.
  • Packaging Changes: When packaging updates occur, we shift the older packaged items to Clearance.
Clearance Does NOT Imply:
  • Poor Quality: Clearance items meet our rigorous quality standards and often brand new, unopened products.
  • Limited Support: You'll receive our excellent customer service for Clearance items. Note, all Clearance purchases are Final Sale and not covered by the MatterHackers Return Policy.

Note, all Clearance purchases are Final Sale and not covered by the MatterHackers Return Policy.

Back to top