Creality3D Creality3D CR-10S Pro 3D Printer
Creality3D's CR-10S Pro takes the ease-of-entry design of the CR-10S and improves it in every way. The new dual-geared extruder, auto-bed leveling, Capricorn tubing, and upgraded mainboard are just some of how Creality3D has brought the already astoundingly valued CR-10S into the next level of reliability and value. For new users looking to learn 3D printing, to the hobbyist that loves to tinker, modify and upgrade, the CR-10S Pro is both a lean and powerful FFF 3D Printer that will be the perfect addition to a workshop of any size.
Easy Assembly Gets You Printing Now
The CR-10S Pro comes as a kit that only requires three pieces for assembly. It typically takes only ten to fifteen minutes before your Creality3D 10S Pro is up and running.
The Hobbyist's Dream: Hackable and Upgradable
The Creality 3D printer line is completely open-source, allowing for add-ons and upgrades of almost every component on the machine. From a BL Touch automatic bed leveling probe, to a Micro-Swiss or E3D all-metal hotend, to a Bondtech extruder - the Creality 3D printers give you an awesome foundation for experimentation.
Designed with Safety and Stability in Mind
Creality3D has improved the durability and robustness of its 3D printer line by upgrading its fundamental structure. The power supply is now from Mean Well, a brand known for its reliability in electronics for over 35 years.
Creality3D also revised the structure of the printer to integrate the user interface from the external control unit into the base of the frame of the printer, which allows for much more readily available information about its status. Further, the interface has been upgraded to a touchscreen, allowing control to be more immediate and responsive.
The inclusion of these trusted names and methods ensures the safety and stability of the CR-10S Pro, allowing you to take your 3D printing to new heights.
Print Size: 300mm x 300mm x 400mm (11.8" x 11.8" x 15.8")
Build Platform: 320mm Length x 310mm Width
Nozzle：Brass 1.75mm x 0.4mm (can be swapped out for 0.3mm or 0.2mm)
Maximum Print Speed: 200mm/s
Max Hotend Temp: 245°C
Max Bed Temp: 90°C
Bed Leveling: Automated - Inductive
Feed System: Bowden style, Capricorn tubing
Connectivity: USB or SD card
Supported OS': Windows, Mac OSX, Linux
Supported Slicing Software: CURA, Simplify3D
Weight: 10.2kg (22.5lbs)
Note: The small metal clips on the borders of the Build Platform reduce the reliable print area by a small amount. If you intend to replace the Build Platform with a glass plate, you can either use a sheet of glass dimensioned at 320mm x 310mm, or place a smaller glass plate on top of the platform, and attach via standard document clips.