Leapfrog has always developed quality products, and the Creatr HS is no different, but the HS has an edge to it - speed! HS stands for High Speed, meaning that the Creatr HS can print at speeds 5 times faster than the original Creatr.
Discover the most versatile printer on the market with the Leapfrog Creatr HS - whether you prefer a single material, or you like to mix it up with dual extrusion, this printer is capable of all your printing needs.
HS stands for High Speed: printing up to 5 times faster than the regular Creatr. With an astonishing print volume of 14.8 liters and the possibility to print objects up to 30cm of length, the Creatr HS is the most versatile printer on the market. The Creatr HS is also much more convenient since it is stand-alone featuring a 4inch full color LCD screen and the ability to print directly from USB. By standard the Creatr HS is equipped with dual extrusion.
Leapfrog's Creatr HS is the epitome of speedy printing, and when we say speedy, we mean speedy: up to 300mm per second! Not only is this printer fast, but its build volume is pretty impressive as well. If you are printing one material (single extrusion) the build volume is 11.4" x 10.6" x7.09" whereas dual extrusion is slightly smaller, with a build volume of 11.4" x 10.6" x9.5".
The Creatr HS has a nozzle temperature of up to 275C, which means it can print ABS, PLA, PVA, and various specialty filaments, including Nylon!
The Creatr HS has a 4 inch stand alone LCD screen and the ability to print with dual extrusion. Limitless possibilities are available with the HS. The main feature, and perhaps the best, is the speed of the Creatr HS - Leapfrog has lowered the weight of the extruder carriage, therefore, you are able to print at speeds up to 300mm per second!
Forget SD Cards - you can run the Creatr Hs simply from a USB stick - preheat and start printing in ten minutes!
Check out this informative video on the Creatr Hs!
4 Inch Color LCD Screen
Easy Usability with the USB Stick!